Tube Radio AM Broadcast Transmitter Zenith Scott Philco

American Made Now your antique radio can play some of the same programs it did when it was new! C rules Part 15 this is a perfectly legal transmitter And you need no license to use it. The rules state that the transmitter may only transmit 100mw input into a 5 meter antenna and transmit no farther than 200 feet and this transmitter meets all these rules. The transmitter electronically is overbuilt on purpose so that it will last a lifetime.

No part in this transmitter is overworked in any way. And another big plus is if you get a power surge or spike this transmitter has a better chance of surviving than the transistor models out there.

Transistor models are throw away items, these tube transmitters can be repaired forever. Specifications Power 115-120 volts AC Power usage 8 watts Size. 6SA7 (12au7 is a duel tube making it a 2 stage audio amp) Frequency 550khz to 1750KHZ.

(up to 1750 for the Europe users) Power in 1 volt peak audio power (headphone volume) Power input to oscillator tube 100mw RF power Audio. Antenna 15 foot of #20 wire Comes with 1. 5 meter 18' antenna wire.

Attach the antenna and feed the wire out. Plug in your RCA to mini patch cord into the transmitter and into your source of audio (headphone level) Use a headphone and make sure you actually have audio coming out of the source. Set the transmitter volume control to 12:00 or midway. Plug unit into a 120 volt ac outlet.

Turn on one of your radios and set frequency to the preset frequency you gave me. Tune your antique radio around that frequency and you should find your. Music from your source device. The item "Tube Radio AM Broadcast Transmitter Zenith Scott Philco" is in sale since Monday, April 23, 2018.

This item is in the category "Consumer Electronics\Radio Communication\Other Radio Communication". The seller is "richsonic" and is located in Las Vegas, Nevada. This item can be shipped worldwide.

---